Basic Info.
Measurement Range(Film)
0.01-10,000 & 0.05-100,000
Test Precision
0.01 Cc/M2•day•0.1MPa
Primary Sensor Quantity
2
Test Pattern
Dual Group Three-Chamber Integrated (Mean Value)
Vacuum Efficiency
Less Than 27PA in 10 Minutes
Temperature Control Accuracy
±0.1ºC
Transport Package
Cartons
Specification
800× 500× 380mm
Product Description
Product function:
It is applied to various gas permeation rate detection of O2, CO2, N2 and air, etc. Also in plastic film, composite membrane, High-barrier materials, sheet, metal foil, rubber, etc.
Operating principle:
Using the principle design of differential pressure method, put treated sample in the middle of upper and bottom chamber in advance. Pressure tightly and seal,pick up the suction to the whole system, after reaching the required vacuum degree, close bottom chamber, fill with certain test gas to high pressure chamber, and adjust upper chamber pressure, keep on two sides of the sample forming constant air pressure gradient difference, the gas is under the action of differential pressure gradient, permeating from high-pressure side (upper chamber) to vacuum side (bottom chamber).Accurately measure vacuum chamber (bottom chamber) intensity of pressure variation, calculate various barrier property parameters of test sample. Fully conform to the standard ASTM D1434.
Application characteristic
High speed vacuum ability, reduce the vacuum time,accelerate the degassing, reduce the test error.
Short test time, high efficiency;
Can measure toxic gases, no gas leak;
Automatically adjust the test pressure, fit for various pressure requirements;
Save functions when power failure;
A whole-process monitor, automatic recording, can reappear in the whole test process again
Strong graph curve function, convenient for comparison test and analysis;
Automatic testing: Set the test parameters, test automatically proceeds after starting, automatically judge if the test is over and save the test result.
There is general data base system in host software, data could be exported, could store the data, inquire, print, etc. Through the analysis of historical data,it is easy to grasp the history dynamic of the products.
Product feature
Pure semiconductor cold and heat bidirectional temperature control, automatically control temperature warming and cooling. Temperature range is wider and more accurate,parallel work, higher reliability.
Apply base line technology; remove the system error, test result is more accurate.
Be of accurate pressure control ability, maintaining constant pressure difference.
Adopt top grade high precision vacuum transducer, high quality component and part, precise pipeline system and pressure sensor, ensure stability and reliability of instrument running
Embedded system control, fully controlled by computer
Meeting Standards
Compatible with the standard of various tests ISO, etc:ASTM D1434,ISO 2556,ISO 15105-1,JIS K7126-A,
Technical index | Technical parameter |
Model | LA-APT-62 |
Measurement range (cc/m2·day·0.1MPa) | 0.01-10,000 & 0.05-100,000 |
test precision | 0.01 cc/m2/day/0.1MPa |
Test sample quantity | 6 |
Primary sensor quantity | 2 |
test pattern | Dual group three-chamber integrated (mean value) |
vacuum error | 0.1P&0.01Pa |
vacuum degree | <10Pa |
Vacuum efficiency | Less than 27Pa in 10 minutes. |
Temperature range | 5ºC-50ºC , Semiconductor bidirectional temperature control (water bath optional) |
Temperature control accuracy | ±0.1ºC |
humidity range | 5~90%RH(double-flowhumidity method, optional) |
Humidity precision | ±2%RH |
test pressure | 0.002MPa~0.2Mpa |
air source pressure | 0.1MPa~0.8 MPa |
test gas | O2,N2,CO2 or other gas |
carrier gas port | ¢8 |
vacuum tube diameter | ¢15 |
Display and control method | PC machine fully control mode |
Correction mode | Base line correction, Standard film correction,vacuum transducer external correction |
sample thickness | ≤3mm |
Test area | 30cm2, circle |
Main machine dimension (L*B*H) | 800×500×380 mm |
Weight(KG) | 70Kg |
Power supply | 220V AC 50HZ |
Standard configuration
No | Name | Quantity | Model | Unit | Remark |
1 | Test main machine | 1 | LA-APT-62 | Set | Include Vacuum sensor system, pressure sensor,gas control system,environmental control system,communication system,display & control system, etc. |
2 | high-vacuum pump | 1 | ND051 | Set | Vacuum ability:0.6Pa |
3 | professional test software | 1 | APT series | Set | operating system:Windows 2000 or above XP hardware requirement:memory 1G,hard disk above 80G |
4 | communication cable | 1 | | Pc | Standard RS232 communication line,2m long |
5 | Vacuum steel tube | 1.5 | 15mm | meter | |
6 | Gas hose | 2 | Diameter 8mm | meter | |
7 | air valve | 1 | | Pc | |
8 | Circle Sample Cutter-sample | 1 | | Set | 30cm2sampler, cut the sample |
9 | Filter paper sampling plate | 1 | | Set | cut filter paper |
10 | sealing grease | 1 | | Pc | Dow Corning |
11 | USB conversion line | 1 | | Pc | USB1.1 expansion path, 1m long |
12 | computer | 1 | | Set | |
Optional | Gas cylinders for test(oxygen ,etc) |
Address:
The 9th Floor, District A, Liancheng Waiking Street, Jianshe Road, Yuetang, Xiangtan, Hunan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Health & Medicine, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 14064, GMP
Company Introduction:
As professional laboratory equipment manufacturer, we are in line with experimental equipment for many years, such as Vapor Permeability Tester, Gas permeation rate tester, drying oven, testing machine, Purification equipments, Geology testing, ICP&DRS, etc. <br><br>We have 20 years eexperience in this industry. We have sophisticated technology to serve for enterprise, scientific research institution, universities and colleges, etc. We cooperate with many research institution and university, etc. <br><br>Our product is widely used in Europe, North America, Asia, Africa, Latin America, etc. We have branches in hunan, and HK. We are paying attention to service and improving our product these years. Customer is everything, which is our service aim; All of our efforts are focused on providing the suitable testing instruments with reliable results. We believe that high quality and good service will pay important role in the future. <br><br>We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price. <br><br>We have persisted on the business idea of "Integrity Basis and Quality First" for the stable and constant development. We are making effort to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, quality and service are our supreme target!