Wet Abrasion Scrub Tester for Scrub Resistance
|FOB Price:||US $200-500 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $200-500/ Piece|
|Production Capacity:||50000 Sets Per Year|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: AST-101
- Brush Weight: 450 ± 2g
- The Brush Running Frequency: 37 ± 1 Times / Min
- Test Board Size: 130 × 150 × 3mm
- Power Supply: 380V 50Hz.
- Standard: GB / T9755-2014
- Transport Package: Wooden Case
- Origin: China
- Brush Size: 38 × 90mm
- Brush Reciprocating Stroke: 300mm
- The Counter: 0-9999
- Motor Power: 90W
- Used to: Evaluate The Performance of Paint Scrubbing
- Trademark: labmen, OEM
- Specification: 460 * 560 * 450mm
- HS Code: 9024800000
The machine has been upgraded, in line with GB / T9755-2014 "synthetic resin emulsion wall paint" the latest standards.
The corresponding substrate from the cement board to black polyolefin plastic sheet
The painted surface needs to be tested for scrub resistance by a brush sponge or other means. The apparatus of the scrub test produces a small range of repeating damage to the sample caused by abrasion or erosion in an in-process state to mimic daily use or wear. Examples of tests
Including interior and exterior architectural coatings, wallpaper or carpets. Resistance to scrubber design by G8 / T9266-88. The device uses soap water circulation device, with a new structure of science, simple operation and so on.
This tester can be measured and can be scrubbed with anti-wear performance. Using two brushes to accelerate the simulation of "wear and scratch" test, the results of good repeatability.
It is used to evaluate the performance of paint scrubbing equipment. It is also possible to evaluate any film composite treated surface. Such as paint, plating, floor, cover layer, the density of wood and other forms of surface performance, the device on the standard brushing and testing the coating on the scrubber, the number of scrubber can be read directly by the counter. According to the number of scrubbing resistance, it is possible to evaluate the importance and necessity of scour resistance testing. The instrument and supporting the use of national standards, coating manufacturers and coatings research department is essential for detection equipment.
The main technical parameters:
1. connecting arm connected to two brushes for well testing
2. Brush stroke: 300mm Brush weight: 450 ± 2g
3. Power supply: 220V. 50Hz
4. Brush operating frequency: 37 ± 1 times / min
5. five-digit (99999) preset counter, start the instrument automatically stops after the preset number of times
6. can be adjusted to DIN. ISO or ASTM standards for comparative testing methods, you can use the brush, scrubbing pad, sponge, cleaning cloth and so on.
1.the brush size: 38 × 90mm on the floor are uniform 60 Ø3 mouth, wear pig mane length 19mm.
2,.brush weight (including brush): 450 ± 2g.
3. brush reciprocating stroke: 300mm.
4. the brush running frequency: 37 ± 1 times / min.
5.the counter: 0-9999
6. test board size: 130 × 150 × 3mm.
7.the motor power: 90W
8.power supply: 380V 50Hz.
9,.Overall dimensions: 460 * 560 * 450
|AST-101 Wet Abrasion Scrub Tester|
|brush size||38 × 90mm|
|brush weight||450 ± 2g|
|brush reciprocating stroke||300mm|
|the brush running frequency||37 ± 1 times / min|
|test board size||130 × 150 × 3mm|
|power supply||380V 50Hz.|