Air Permeation Rate Tester for High-Barrier Materials with ISO 2556
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||1000 Sets Per Month|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: LA-DPG-11A
- Test Precision: 0.01 Cc/M2•day•0.1MPa
- Primary Sensor Quantity: 1
- Vacuum Error: 0.1PA
- Vacuum Efficiency: Less Than 27PA in 10 Minutes
- Humidity Precision: ±1%Rh
- Transport Package: Cartons
- Origin: China
- Measurement Range(Film): 0.05-100,000
- Test Sample Quantity: 1
- Test Pattern: Single Cavities Independent
- Vacuum Degree: <10PA
- Temperature Control Accuracy: ±0.1ºC
- Trademark: labmen, OEM
- Specification: 680× 450× 520mm
- HS Code: 9031809090
It is applied to various gas permeation rate detection, such as O2,CO2,N2 and air, etc, in plastic film, composite membrane, High-barrier materials, sheet, metal foil, rubber, etc.
Using the principle design of differential pressure method, put treated sample in the middle of upper and bottom chamber in advance. Pressure tightly and seal,pick up the suction to the whole system, after reaching the required vacuum degree, close bottom chamber, fill with certain test gas to high pressure chamber, and adjust upper chamber pressure, keep on two sides of the sample forming constant air pressure gradient difference, the gas is under the action of differential pressure gradient, permeating from high-pressure side (upper chamber) to vacuum side (bottom chamber).Accurately measure vacuum chamber( bottom chamber) intensity of pressure variation, calculate various barrier property parameters of test sample. Fully conform to the standard ASTM D1434.
High speed vacuum ability, reduce the vacuum time,degassing more thoroughly, reduce the test error.
Short test time, high efficiency;
Could extend to test bottle, bag;
Little gas consumption, one bottle of gas could be used for one month continuously.
Could test arbitrary gas, include poisonous gas,the gas don't leak,the gas is consumed to one bottle per six months.
Automatically adjust the test pressure, fit for various pressure requirements, which could be low to 2kpa.
Save functions when power failure;
A whole-process monitor, automatic recording, sampling rate could be adjusted, automatically repeat the test.
The whole process could reappear in whole process, Strong graph curve function, convenient for comparison test and analysis;
Automatic testing: Set the test parameters, test automatically proceeds after starting, automatically judge the test is over and save the test result.
There is general data base system in host software, data could be exported, could store the data, inquire, print, etc. Through the analysis of historical data, it iseasy to grasp the history dynamic of the products.
Pure semiconductor temperature controlled, automatically control temperature warming and cooling. Temperature range is more wide and more accurate,parallel work, higher reliability.
Apply base line technology; remove the system error, test result is more accurate.
Be of accurate pressure control ability, maintaining constant pressure difference.
Adopt top grade high precision vacuum transducer, high quality component and part, precise pipeline system and pressure sensor, ensure stability and reliability of instrument running
Embedded system control, full computer control
Compatible with the standard of various tests ISO, etc: ASTM D1434,ISO 2556,ISO 15105-1,JIS K7126-A,YBB 00082003
Measurement range (cc/m2·day·0.1MPa)
Test sample quantity
Primary sensor quantity
single cavities independent
Less than 27Pa in 10 minutes, less than 20Pa in 15 minutes.
Test time < 4 hours, when transmittance >5cc/m2.day.0.1MPa
5ºC-55ºC (90ºC is optional.)
temperature control accuracy
5~90 %RH(double-flowhumidity method)
air source pressure
carrier gas port
vacuum tube diameter
Display and control method
Computer fully control mode
Base line correction, Standard film correction,vacuum transducer external correction
50cm2,circle( other dimension could be customized.)
Main machine dimension
220V AC 50HZ
Test main machine
DPG -11A/31J/33D Include Vacuum sensor system,
pressure sensor,gas control system,environmental control system,communication system,display & control system, etc.
professional test software
operating system:Windows 2000 or above XP
hardware requirement:memory 1G,hard disk above 80G
Standard RS232 communication line,2m long
Vacuum steel tube
Circle Sample Cutter-sample
50cm2sampler, cut the sample
Filter paper sampling plate
cut filter paper
USB conversion line
USB1.1 expansion path, 1m long
Bottle bag test clamp
Gas cylinders (oxygen ,etc)