High Quality of Air Permeability Tester
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||1000 Sets Per Month|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: LA-APT-66
- Test Precision: 0.01 Cc/M2•day•0.1MPa
- Primary Sensor Quantity: 6
- Vacuum Error: 0.1p&0.01PA
- Vacuum Efficiency: Less Than 27PA in 10 Minutes
- Humidity Precision: ±2%Rh
- Transport Package: Cartons
- Origin: China
- Measurement Range(Film): 0.01-50,000
- Test Sample Quantity: 6
- Test Pattern: Six Cavities Sensors Independent
- Vacuum Degree: <10PA
- Temperature Control Accuracy: ±0.1ºC
- Trademark: labmen, OEM
- Specification: 700× 500× 380mm
- HS Code: 9031809090
It is applied to various gas permeation rate detection of O2, CO2, N2 and air, etc. Also in plastic film, composite membrane, High-barrier materials, sheet, metal foil, rubber, etc.
Using the principle design of differential pressure method, put treated sample in the middle of upper and bottom chamber in advance. Pressure tightly and seal,pick up the suction to the whole system, after reaching the required vacuum degree, close bottom chamber, fill with certain test gas to high pressure chamber, and adjust upper chamber pressure, keep on two sides of the sample forming constant air pressure gradient difference, the gas is under the action of differential pressure gradient, permeating from high-pressure side (upper chamber) to vacuum side (bottom chamber).Accurately measure vacuum chamber (bottom chamber) intensity of pressure variation, calculate various barrier property parameters of test sample. Fully conform to the standard ASTM D1434.
High speed vacuum ability, reduce the vacuum time,accelerate the degassing, reduce the test error.
Short test time, high efficiency;
Can measure toxic gases, there is no gas leak;
Automatically adjust the test pressure, fit for various pressure requirements;
Save when power failure;
A whole-process monitor, automatic recording, can reappear in the whole test process again
Strong graph curve function, convenient for comparison test and analysis;
Automatic testing: Set the test parameters, test automatically proceeds after starting, automatically judge the test is over and save the test result.
There is general data base system in host software, data could be exported, could store the data, inquire, print, etc. Through the analysis of historical data,it is easy to grasp the history dynamic of the products.
Pure semiconductor cold and heat bidirectional temperature controlled, automatically control warming and cooling.Temperature range is wider and more accurate,parallel work, higher reliability.
Apply base line technology; remove the system error, test result is more accurate.
Be of accurate pressure control ability, maintaining constant pressure difference.
Adopt top grade high precision vacuum transducer, high quality component and part, precise pipeline system and pressure sensor, ensure stability and reliability of operation
Embedded system control, fully controlled by computer
Compatible with the standard of various tests ISO, etc:ASTM D1434,ISO 2556,ISO 15105-1,JIS K7126-A
Measurement range (cc/m2·day·0.1MPa)
Test sample quantity
Primary sensor quantity
Six cavities sensors independent
Less than 27Pa in 10 minutes.
5ºC-50ºC, semiconductor bidirectional temperature control (optional)
5~90%RH(double-flowhumidity method, optional)
air source pressure
carrier gas port
vacuum tube diameter
Display and control method
Computer fully control mode
Base line correction, Standard film correction,vacuum transducer external correction
Main machine dimension
220V AC 50HZ
Test main machine
Include Vacuum sensor system,
pressure sensor,gas control system,environmental control system,communication system,display & control system, etc.
professional test software
operating system:Windows 2000 or above XP
hardware requirement:memory 1G,hard disk above 80G
Standard RS232 communication line,2m long
Vacuum steel tube
Circle Sample Cutter-sample
30cm2cut the sample
Filter paper sampling plate
cut filter paper
USB conversion line
USB1.1 expansion path, 1m long
Gas cylinders used for test(oxygen ,etc)